Disabling floppy controller

Article View: comp.sys.ibm.pc

Article #43502

#43502

From: Ron Zahavi
Date: Mon, 05 Mar 1990 19:24

15 lines
1084 bytes

A friend of mine has an old Mitsubishi 386.  Either because of a problem
or simply by being an older computer, it does not support a 3.5 drive.  He
thought this was a good opportunity to upgrade the hard disk controller
from a 3/1 to 1/1 interleave and get a card that will also support the
floppies (e.g. a DTC 7280).

The problem is that the floppy controller is on the mother board and the
DTC (and I assume other such cards) floppy part will not work while the
other is active.  Is there a way to disable the embedded floppy controller?
Jumper on the mother board?  A chip that can be removed?  Cut the whole thing
away?
 
  Thanks,
 
 -- Ron --

Technical Details

Message-ID: <100170@linus.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!xylogics!merk!alliant!linus!gateway.mitre.org!rzahavi

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!xylogics!merk!alliant!linus!gateway.mitre.org!rzahavi
From: rzahavi@gateway.mitre.org (Ron Zahavi)
Newsgroups: comp.sys.ibm.pc
Subject: Disabling floppy controller
Message-ID: <100170@linus.UUCP>
Date: 5 Mar 90 19:24:48 GMT
Sender: news@linus.UUCP
Reply-To: rzahavi@gateway.mitre.org (Ron Zahavi)
Organization: The Mitre Corporation
Lines: 15