Article View: comp.sys.ibm.pc
Article #43569Re: QEMM freezes computer
From: Brent Besler
Date: Mon, 05 Mar 1990 19:24
Date: Mon, 05 Mar 1990 19:24
10 lines
1136 bytes
1136 bytes
I have had similar wierd problems with Desqview on a Jameco 386/20 motherboard
with an AMI bios. I am using QEMM version 4.23 and device=qemm.sys is
the first line in config.sys. If I had any parameters at all the system
would lock up, requiring a hardware reset. I would get a Internal Stack
Overflow System Halted error. The cause was having device=ansi.sys anywhere
in the config.sys file. I can load a bunch or other dd's into both normal
and high memory, but ansi.sys locks up QEMM with any parameters on the line.
With no parameters, is and ansi.sys work fine. I am using PC DOS 3.31.
Brent H. Besler
Technical Details
Message-ID:
<234@vela.acs.oakland.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!samsung!umich!vela!bbeslerReferences:
<2764@aecom.yu.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!samsung!umich!vela!bbesler From: bbesler@vela.acs.oakland.edu (Brent Besler) Newsgroups: comp.sys.ibm.pc Subject: Re: QEMM freezes computer Message-ID: <234@vela.acs.oakland.edu> Date: 5 Mar 90 19:24:55 GMT References: <2764@aecom.yu.edu> Reply-To: bbesler@vela.acs.oakland.edu (Brent Besler) Distribution: na Organization: Oakland University, Rochester MI Lines: 10