🚀 go-pugleaf

   The problem is that your floppy thinks it is connected to an XT, and
it is using pin 34 as a Drive Ready indication.  When you hook up a
3.5" floppy to an AT, you want pin 34 to indicate Disk Change.

   Look on the logic board on the floppy.  There will probably be a
jumper labeled  DS/RDY or some such thing.  Usually it is three
pins where you jumper the middle and one of the outside pins.

   This one had me going for months...   (I have a lot of 'war stories'
about hooking up 3.5" drives.)


   Like someone else stated, there is another way you can get around this
problem -- sort of.  You need to hit ^C at the Dos prompt after changing
disks.


   One 3.5" floppy drive that I have doesn't have any jumpers on it.
I get the impression that it was designed for use with an XT.  But
I wonder if I can get it to work on an AT if I put a capacitor
in series with pin 34 so the AT would only see pulses...  Hmmm...
Something to try this weekend...  (Any bets?? :-)

   Hope this helps.

Jon
3/8/90
...{uunet | mcdchg}!amtfocus!outback!wombat                     <-- Home
...{uunet | mcdchg | gatech | att}!motcid!scheer                <-- Work
amtfocus!outback!wombat@UUNET.UU.NET or F1JON@ISUMVS.BITNET     <-- Bitnet
amtfocus!outback!wombat@chg.mcd.mot.com                         <-- Internet
   "In search of the Warmer Blid Custard Mite Of Glut..." -- DM