Re: Power up PC and NEC 3D

Article View: comp.sys.ibm.pc

Article #43798

#43798

From: Richard Maine
Date: Fri, 09 Mar 1990 20:59

17 lines
1215 bytes

On 3 Mar 90 17:38:00 GMT, stuart.rose@canremote.uucp (STUART ROSE) said:

STUART> The monitor MUST be turned on first for the ATI card to recognize
STUART> that the monitor is indeed a VGA type. If turned on last, or there
STUART> is a race condition, the ATI VGA Wonder defaults to EGA.

STUART> I always turn on my monitor first, and turn it off first.

I have my NEC 3D and 25MHzh clone with an ATI VGA Wonder card on the
same power strip and never have any such problems.  But then, I also
used ATI's VSETUP program to setup the ATI card to expect a NEC 3D
specifically.  This might help.

--

Richard Maine
maine@elxsi.dfrf.nasa.gov [130.134.64.6]

Technical Details

Message-ID: <MAINE.90Mar9125945@altair.dfrf.nasa.gov>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!usc!brutus.cs.uiuc.edu!uakari.primate.wisc.edu!ames!skipper!elxsi!maine

References: <90030820225699@masnet.uucp>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!usc!brutus.cs.uiuc.edu!uakari.primate.wisc.edu!ames!skipper!elxsi!maine
From: maine@elxsi.dfrf.nasa.gov (Richard Maine)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Power up PC and NEC 3D
Message-ID: <MAINE.90Mar9125945@altair.dfrf.nasa.gov>
Date: 9 Mar 90 20:59:45 GMT
References: <90030820225699@masnet.uucp>
Sender: news@skipper.dfrf.nasa.gov
Organization: NASA Dryden, Edwards, Cal.
Lines: 17
In-reply-to: stuart.rose@canremote.uucp's message of 3 Mar 90 17:38:00 GMT

Reply to Parent Message