🚀 go-pugleaf

From article <3594.25f7a52c@vax5.cit.cornell.edu>, by merx@vax5.cit.cornell.edu:
> Hi all,
>  I just got a OKIDATA 192 to play with and found it won't print graphics on my
> XT-clone. I thought the 192 was IBM compatible. The only time I got it to print
> graphics was with a DTP that had a 192 driver. (A friend of mine has a 192+
> that
> IS IBM compatible.) Any one using a OKI.192 with a PC or XT???
> (A post here is fine)
> 
>   Thanks,
>   Mike Ray                  bitnet::mer@crnlns

I am using an Oki 192+ with my XT.  It is borrowed so I don't have the manual
but it has been set to an IBM graphics mode.  This allows me to print graphics.
So long as I stipulate IBM graphics when loading printer drivers I have no 
problem.

I mentioned not having the manual so as to inform you that I do not know what
the switch setting should be to select IBM graphics mode.  There is an access
hatch at thje top rear center of the unit.  Open this and you will see
a number of dip switches.  If you have the manual you should have no trouble
setting these accordingly.


********************************************************************
* 'Captain' Kirk DeHaan		|    "There's a lot to be said     *
*  Sun Microsystems Inc.	|      For a blow to the head"     *
*				|				   *
*  net - kirk@sun.com		|	   Blue Oyster Cult        *
*  packet - n6sxr.ampr.org	|				   *
*  cis - 73427,1657		|				   *
*				|				   *
********************************************************************