Re: OKI.192 + XT = text only??

Article View: comp.sys.ibm.pc

Article #43953

#43953

From: John F. Bruno
Date: Mon, 12 Mar 1990 18:00

26 lines
1443 bytes

In article <3594.25f7a52c@vax5.cit.cornell.edu> merx@vax5.cit.cornell.edu writes:
 >Hi all,
 > I just got a OKIDATA 192 to play with and found it won't print graphics on my
 >XT-clone. I thought the 192 was IBM compatible. The only time I got it to print
 >graphics was with a DTP that had a 192 driver. (A friend of mine has a 192+
 >that
 >IS IBM compatible.) Any one using a OKI.192 with a PC or XT???
 >(A post here is fine)
 >
 >  Thanks,
 >  Mike Ray                  bitnet::mer@crnlns

My Oki 192 works fine (It is attached to an AT, though) Maybe you have the
wrong font selected? You can find out what font you have by holding down
one of the printers buttons as you turn it on (I think FF or TOF-SET) On
my printer, it says:

...
PR MODE           DP
CH SET            SET 1
...

See you manual on how to change this setting if it doesn't agree with the
above.

---jb

Technical Details

Message-ID: <2427@rodan.acs.syr.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!aplcen!uakari.primate.wisc.edu!brutus.cs.uiuc.edu!rpi!uupsi!rodan!jfbruno

References: <3594.25f7a52c@vax5.cit.cornell.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!aplcen!uakari.primate.wisc.edu!brutus.cs.uiuc.edu!rpi!uupsi!rodan!jfbruno
From: jfbruno@rodan.acs.syr.edu (John F. Bruno)
Newsgroups: comp.sys.ibm.pc
Subject: Re: OKI.192 + XT = text only??
Summary: Wrong font???
Message-ID: <2427@rodan.acs.syr.edu>
Date: 12 Mar 90 18:00:03 GMT
References: <3594.25f7a52c@vax5.cit.cornell.edu>
Reply-To: jfbruno@rodan.acs.syr.edu (John F. Bruno)
Distribution: comp
Organization: Syracuse University, Syracuse, NY
Lines: 26

Reply to Parent Message