3.5" external drive

Article View: comp.sys.ibm.pc

Article #8661

#8661

From: Sanjay Hiranandani
Date: Mon, 15 Jan 1990 22:40

6 lines
641 bytes

I have an IBM 3.5" external drive, which connects to an 8 bit card which came
with the drive. (The only number on the card is PY227B). I plan to use this
drive as the only floppy drive on an AT.

How would I go about configuring it? and could I use the 8 bit controller card,
or would I have to buy a new one?

Technical Details

Message-ID: <3317.25b21916@vax5.cit.cornell.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uwm.edu!rpi!batcomputer!cornell!vax8530!gdo

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uwm.edu!rpi!batcomputer!cornell!vax8530!gdo
From: gdo@vax5.cit.cornell.edu (Sanjay Hiranandani)
Newsgroups: comp.sys.ibm.pc
Subject: 3.5" external drive
Message-ID: <3317.25b21916@vax5.cit.cornell.edu>
Date: 15 Jan 90 22:40:22 GMT
Distribution: comp
Lines: 6