Leading Edge Model M

Article View: comp.sys.ibm.pc

Article #8717

#8717

From: Stephen Peterson
Date: Tue, 16 Jan 1990 21:27

20 lines
1227 bytes

For lack of a better category I'm posting this question here. (its a compatible
I'm told).

I have a professor that has recently aquired a Leading Edge Model M. It has 8
dip switches next to the RS-232 port in the back. Does anyone know for sure
what these are for and how they should be set. (I assume its baud rates, parity
stop bits and etc.)

He has contacted a local Leading Edge dealer and has gotten no answers. He also
contacted Leading Edge and received no answer. If any one could help, we would
both appreciate it.

Thanks in advance.
-Steve

_______________________________________________________________________________
Stephen D. Peterson                         - Disk Claimer?
MicroComputer Systems Consultant            - Discus Claimer?
Penn State University                       - Discust Clammer?
SDP2 @ PSUVM (bitnet)                       - What ever

Technical Details

Message-ID: <90016.162746SDP2@PSUVM.BITNET>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!brutus.cs.uiuc.edu!psuvax1!psuvm!sdp2

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!brutus.cs.uiuc.edu!psuvax1!psuvm!sdp2
From: SDP2@PSUVM.BITNET (Stephen Peterson)
Newsgroups: comp.sys.ibm.pc
Subject: Leading Edge Model M
Message-ID: <90016.162746SDP2@PSUVM.BITNET>
Date: 16 Jan 90 21:27:46 GMT
Organization: Penn State University
Lines: 20