🚀 go-pugleaf

From article <1990Jan15.220313.22261@geac.com>, by wdawe@geac.com (Wayne Dawe):
> In article <5966@cps3xx.UUCP> gcook@cps3xx.UUCP (Greg Cook) writes:
>>I have a Hayes compatible modem and have yet to get Procomm's (2.4.3) 
>>host mode to work.  It answers a call occaisonally, and if it does, it
>>just sits there!  Or it keeps cycling between some dumb messages procomm
>>has and won't stop (even not connected, when I initiate host mode).

> When using Host mode in Procomm you must ensure that your modem is set
> so the carrier detect line follows the the carrier detect status. This is
> done either by setting a dip switch or in newer modems by sending a
> command to the modem. Another thing to check is that you are using the proper
> method to hang-up the modem. Most Hayes compatible modems uses the ATH0

I have checked all of these things, and still cannot get it to work?????

What else coule it be???






=========================================================================
Greg Cook                                Chemistry IS life! 
Michigan State University      Watch for the next generation of Enamines 
gcook@horus.cem.msu.edu              coming to a Journal near you!