Article View: comp.sys.intel
Article #488Re: Intels Overdrive on an IBM PS/2 90 AG9 ?
From: Morten Christian Holmgreen
Date: Tue, 18 Aug 1992 22:23
Date: Tue, 18 Aug 1992 22:23
24 lines
1422 bytes
1422 bytes
LUGEBE1@AWIIMC12.IMC.UniVie.AC.AT (DI Bernhard Luger) writes: >Has anybody successfully installed an INTEL Overdrive chip in an IBM PS/2 >Model 90 AG9. The processor board originally contains a 486 SX (|) chip with >a 20 MHz clock. 487 option is available but still too slow for me. >Any comment about problems or, even better, no problems is welcome. >Thanks in advance >Berny Luger (Biomedical Engineering, Vienna) > Not quite, but close... I've installed an OverDrive in a model 95-AHF (25 Mhz SX) and it works GREAT. The only thing I needed besides the OverDrive was a newer reference disk (ver. 1.10) that allowed a processor change. Just remember, that the OverDrive goes into the 487 slot, and that the 486SX must remain on the processor-complex... Christian -- M. Christian Holmgreen / joker@diku.dk / mochmch@uts.uni-c.dk student, University of Copenhagen, Dept. of Computer Science "Human errors can only be avoided if one can avoid the use of humans"
Technical Details
Message-ID:
<1992Aug18.222321.15121@odin.diku.dk>Path:
arc1-ca.pugleaf.net!sparky!uunet!mcsun!sunic!dkuug!diku!jokerReferences:
<1684611056.LUGEBE1@AWIIMC12.IMC.UniVie.AC.AT>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!sunic!dkuug!diku!joker From: joker@diku.dk (Morten Christian Holmgreen) Newsgroups: comp.sys.intel Subject: Re: Intels Overdrive on an IBM PS/2 90 AG9 ? Message-ID: <1992Aug18.222321.15121@odin.diku.dk> Date: 18 Aug 92 22:23:21 GMT References: <1684611056.LUGEBE1@AWIIMC12.IMC.UniVie.AC.AT> Sender: joker@freja.diku.dk Organization: Department of Computer Science, U of Copenhagen Lines: 24