Article View: comp.sys.intel
Article #623Instruction Decoder/Clock Cycle Counter for 80386
From: Steve Mabbs
Date: Thu, 31 May 1990 00:52
Date: Thu, 31 May 1990 00:52
14 lines
961 bytes
961 bytes
Does anyone have any software to decode 80386 instructions and calculate the number of clock cycles taken to execute the decoded instruction? At the moment, I'm using symmetry-dep.c from the gdb source code, but that doesn't reveal any clock cycle information. Thanks Steve --------------- Stephen A. Mabbs, Dept of Electrical and Electronic Engineering University of Melbourne Phone: office (room 3.10): +61 3 344 6714 PARKVILLE VIC 3052 vlsi lab (room 3.16): +61 3 344 7436 AUSTRALIA Fax: +61 3 344 6678
Technical Details
Message-ID:
<4323@munnari.oz.au>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!munnari.oz.au!mullian.ee.mu.OZ.AU!steveShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!munnari.oz.au!mullian.ee.mu.OZ.AU!steve From: steve@mullian.ee.mu.OZ.AU (Steve Mabbs) Newsgroups: comp.sys.intel Subject: Instruction Decoder/Clock Cycle Counter for 80386 Message-ID: <4323@munnari.oz.au> Date: 31 May 90 00:52:24 GMT Sender: news@cs.mu.oz.au Reply-To: steve@mullian.ee.mu.OZ.AU (Steve Mabbs) Organization: Dept. of Electrical Engineering, University of Melbourne Lines: 14