80386 REMOTE DEBUGGER

Article View: comp.sys.intel

Article #1976

#1976

From: Eitan Froumine
Date: Fri, 23 Feb 1990 21:16

37 lines
1766 bytes

Can anybody recommend a REMOTE-DEBUGGER which allows debugging 
of 80386 embedded system from an MS-DOS PC. 

We need a debugger to support:

1. 80386 Real-Mode (RM) environment.
2. 80386 Protected-Mode (PM) environment.
3. Large code (in terms of development-tools on MS-DOS hosts) 
   which is mainly generated by MetaWare High-C, then link & 
   located by PharLap LinkLoc.  
4. Source code symbolic debugging. 

I heard about: 

1. Concurrent Sciences - SoftScopeIII/86 and SoftScopeIII/386. 
They use the Intel's iSDM monitor for RM and iMIII for PM. 
Intel does not release the source code of the monitors. 
Unfortunately iSDM has a very limited configuration options so I 
cannot tailor it to our target.

2. System & Software Inc - SoftProbe86/TX ?
   (supplied with the monitor source code). 

3. Nu-Mega - SoftICE ?

4. Datalight - C_thru_ROM ?  
   (supplied with the monitor source code). 

P.S.  Is there a special NEWS group for 80386 non-DOS/non-UNIX 
systems? 

-- 
   =  _    ___	_      _    =	___		    ___   = eitan@mlacus.oz{.au}
  =   /   /  /	/  /\__/   =   /__  . _/ _   _	   /__	 == Ph:  +61 3 823 1039
 =   / __/  /	  /   \   =   /__  /  ( (_( ( (   /	=== FAX: +61 3 267 4692
=== / == Eitan Froumine ======= Australian Centre for Unisys Software =========

Technical Details

Message-ID: <361@mlacus.oz>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!samsung!munnari.oz.au!bruce!mlacus!eitan

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!samsung!munnari.oz.au!bruce!mlacus!eitan
From: eitan@mlacus.oz (Eitan Froumine)
Newsgroups: comp.sys.intel,comp.realtime,sci.electronics,comp.sys.ibm.pc,aus.computers.ibm-pc
Subject: 80386 REMOTE DEBUGGER
Keywords: 80386 REMOTE-DEBUGGER EMBEDDED-SYSTEMs
Message-ID: <361@mlacus.oz>
Date: 23 Feb 90 21:16:09 GMT
Organization: The Australian Centre for Unisys Software
Lines: 37