Intel Endeavour Board and Dead System Syndrome

Thread View: comp.sys.intel

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by David Longley Tue, 28 Jan 1997 00:00

#2214

Author: David Longley
Date: Tue, 28 Jan 1997 00:00

17 lines
1402 bytes

I've  had  a number of problems with Intel  Endeavour  boards  in 
standard  Midi Tower cases where the symptoms are as if the  SVGA 
card can not be seen. I think it's something about strain on  the 
motherboards though. 

To all intents and purposes the machine behaves like the SVGA  is 
not connected, but it doesn't go on to boot either sometimes. The 
only  solution  I  have  found is to  press  the  bottom  of  the 
motherboard whilst jiggling the cards etc......

I  know  others have encountered similar problems  and  would  be 
grateful  for an explanation from the technical folk at Intel.  I 
have not had this problem with cheaper boards.

-- 
David Longley

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads