🚀 go-pugleaf

In article <12035@skye.cs.ed.ac.uk> nick@lfcs.ed.ac.uk writes:

>My copy of Silverlining 5.28 arrived yesterday, so I thought I'd try it out
>on a slow 20Meg Rodime here at work since my SE/30 is away for repair.
>
>It runs now, but getting it going was total bombsville. All the read/write
>tests would run fine, but Silverlining would freeze (mouse pointer and all)
>when trying to install the drivers. It would freeze also when attempting to
>format.

I'd advise against using SilverLining, or _any_ general-purpose
third-party disk driver package, with Rodime disks... especially the
older ones.  Rodime's implementation of SCSI is rather quirky... their
older drives in particular have a non-standard implementation of blind
I/O transfers.  Drivers such as SilverLining, which assume a fairly
"vanilla" SCSI interface, will tend to time out or hang the machine
during SCSI-bus transfers to and from the Rodime disk.

Stick with Rodime's own driver/installer... it's less flexible than
SilverLining, but at least it understands the quirks of the disk and
won't lock up your machine.


-- 
Dave Platt                                                VOICE: (415) 813-8917
              Domain: dplatt@ntg.com      UUCP: ...apple!ntg!dplatt
 USNAIL: New Technologies Group Inc. 2468 Embarcardero Way, Palo Alto CA 94303