🚀 go-pugleaf

>>>>> On Wed, 27 Jan 1993 23:20:10 GMT, fisher@ncselxsi.uucp (Chuck Fisher) said:

| In article <ARIE.93Jan27135658@quip.eecs.umich.edu> arie@eecs.umich.edu writes:
|>I found a strange incompatibility between Adobe Type Manager (ATM) version
|>3.0 and Suitcase version 2.1.2 and I wonder if it is a known problem.
|>I installed the two on a PowerBook 160 on top of a clean out of the box
|>installation of System 7.1 using the customized software installation for
|>the PowerBook 160. The PB would stop during the startup process after 
|>loading ATM and would display a blank screen (no messages, no errors,
|>no crashes). When I tried to load each of the two, either ATM or Suitcase,
|>the startup process finished and all was well. This happened even when 
|>Suitcase wasn't opening any suitcases. Finally I changed the loading
|>order having ATM load before Suitcase and they both worked together.
|>
|>Did this happen to anyone else and is there a fix other than changing
|>the order?

| That's right Suitcase, must be loaded after ATM, this a known
| problem.

| -- 
| Chuck Fisher                                        (800) 359-7997 Work
| ncselxsi system administrator                       (415) 964-2819 Home
| uucp:  ...!netcom!ncselxsi!fisher

Is this only on the PowerBook 160 or it happens on other models
as well. The problem doesn't show up on the IIci or the PowerBook
170.
--


Arie.

=========================================================================
| Arie Covrigaru                 |  University of Michigan AI Lab       |
| Phone: (313)994-8887           |  Room 149, Advanced Technology Bldg. |
| Internet: arie@eecs.umich.edu  |  1101 Beal Ave., Ann Arbor, MI 48109 |
=========================================================================