Re: Printed Circuit Board (PCB) layout pgm for Mac

Article View: comp.sys.mac.apps

Article #1231

#1231

From: Donpaul C. Stephens
Date: Mon, 10 Aug 1992 22:47

21 lines
1354 bytes

>Hey!  Im wondering if any of you netters out there are aware of any
>Pinted Circuit Board layout programs out there that are in the PD?

Yes i do, i needed one for my job this summer.  The name of it is
Easytrax.  Problem being i don't know if they are still supporting it or
not.  Please call them and tell em to keep mac support!

contact:
Protel Technology Inc
50 Airport Parkway
SanJose, CA   95110
phone (408) 437-7771
fax   (408) 437-4913

We decided that CMU is getting the Cadence tool set up for the fall, so
i've been delegated the response of figuring out PCB layout on that
using the pmaxes
:-(    :-(    :-(

Donpaul C. Stephens        /* Deathbird */
    - "Live now.  There'll be plenty of time to be dead later."

Technical Details

Message-ID: <4eVq_BC00WBME71=5V@andrew.cmu.edu>

Path:

arc1-ca.pugleaf.net!sparky!uunet!ogicse!das-news.harvard.edu!cantaloupe.srv.cs.cmu.edu!crabapple.srv.cs.cmu.edu!andrew.cmu.edu!ds8k+

References: <1992Aug10.191840.135058@zeus.calpoly.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!ogicse!das-news.harvard.edu!cantaloupe.srv.cs.cmu.edu!crabapple.srv.cs.cmu.edu!andrew.cmu.edu!ds8k+
From: ds8k+@andrew.cmu.edu (Donpaul C. Stephens)
Newsgroups: comp.sys.mac.apps
Subject: Re: Printed Circuit Board (PCB) layout pgm for Mac
Message-ID: <4eVq_BC00WBME71=5V@andrew.cmu.edu>
Date: 10 Aug 92 22:47:41 GMT
Article-I.D.: andrew.4eVq_BC00WBME71=5V
References: <1992Aug10.191840.135058@zeus.calpoly.edu>
Organization: Sophomore, Electrical and Computer Engineering, Carnegie Mellon, Pittsburgh, PA
Lines: 21
In-Reply-To: <1992Aug10.191840.135058@zeus.calpoly.edu>

Reply to Parent Message