🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.mac.apps
Article #2325

Sys 7 Err -605/Err 3 cont'd

#2325
From: Joseph Nathan Hall
Date: Tue, 01 Sep 1992 19:18
47 lines
2578 bytes
A couple of respondents suggested that I had an init conflict.  This
morning, I tried removing INITs one by one until I was down to nothing
but printer resources, MacTCP, etc., just the bare essentials, in my 
System Folder.  This includes removing Tuner and all of the
RasterOps software that comes with the monitor, all the RenderMan
stuff, QuickTime, and so on.

The problems persist.

MacDraw Pro 1.0v1 (or whatever) will launch ONCE, maybe.  All subsequent
attempts are rewarded with error -605s (app partition too small).
Restarting is the only way to relaunch the app, period.

MacX 1.1.7 also launches ONCE, maybe.  It has taken as many as a half
dozen restarts to get it up.  It fails with err -605 or err 3 (SCSI
arbitration failed).  After it fails w/ err 3 (not err -605), subsequent
attempts to launch it generate messages to the effect that the connection
tools aren't working.

Both apps are in oversized partitions, though I have tried a variety
of sizes, to no avail.

The machine is a 20MB Mac IIci running System 7.0.0, Tuner 1.0, a
RasterOps Sweet 16 system (Mx board), with the Disinfectant 2.9 init,
RenderMan & Connect init, RasterOps Accelerator and Monitors Extension,
QuickTime init, MacTCP.  Usually the machine runs in 24-bit mode.
Again, I have tried removing ALL extensions save printer resources
and other ordinary system software.  The hardware is Ethernet card, 
Mx card, monitor, internal drive, mouse, keyboard, period.  The Ethernet 
card is the TechWorks thinwire card with the TechWorks drivers and 
System 7 patch.  

What the @*!& is going on here???  I thought that this version of
MacX claimed to be completely compatible w/ System 7.0.

Reply via EMAIL, please -- I neither receive nor read these newsgroups.

Thanks,

	-j

uunet!joebloe!joseph   (609) 273-8200 day   joseph%joebloe@uunet.uu.net
v   v  sssss | Certified Guru: all-grain brewing,| 2102 Ryan's Run East
 v v  s   s  | C, synthesizer comp & arranging,  | Rt 38 & 41
  v    sss   | photography. Also not a bad cook. | Maple Shade NJ 08052
-----My employer isn't paying for this, and my opinions are my own-----
Technical Details
Message-ID: <01050166.ciei8j@joebloe.maple-shade.nj.us>
Path: arc1-ca.pugleaf.net!sparky!uunet!joebloe!joseph

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!joebloe!joseph
From: joseph@joebloe.maple-shade.nj.us (Joseph Nathan Hall)
Newsgroups: comp.sys.mac.apps,comp.sys.mac.hardware
Subject: Sys 7 Err -605/Err 3 cont'd
Date: Tue, 1 Sep 92 15:18:32 EDT
Organization: 5 Sigma Software
Message-ID: <01050166.ciei8j@joebloe.maple-shade.nj.us>
Reply-To: joseph@joebloe.maple-shade.nj.us
X-Mailer: uAccess - Macintosh Release: 1.5v5
Lines: 47