🚀 go-pugleaf

In article <2348@key.COM> jbr@key.com () writes:
> I have just put together the setup OzTeX -> Freedom of Press Light ->
> DeskWriter (with driver version 2).

BTW, I just bought Freedom Of The Press Light based upon the net
discussion a few weeks back. Running on an Epson EPL-6000, it seems
to work really well, and the output quality is much better than
the MacPrint 1.2 driver (in LaserJet emulation mode).

Only drawback is that I have to break down an buy a meg of RAM for
the printer.  It occasionally gives me a memory error in high definition
mode about 3/4 of the way down the page.

The automatic printing is a bit of a kluge--you have to fool the Chooser
into thinking that you have an AppleTalk LaserWriter.  And since the
EPL-6000 driver only works with the modem port, AppleTalk usage is out
(I don't need AppleTalk, but some users might).

I printed a few things using Command-K, and a few more things that I
saved from comp.lang.postscript, and everything seemed to print as
expected.  Most files took about 1.5 minutes to print (using a IIsi),
although a few of the small examples printed in 20 seconds and one example
with lots of fonts seemed to take about 5 minutes for the first page.

If you like to hack around with postscript and occasionally want to
print very high quality documents, I recomend FOP-Light.  Because of
the speed factor, it wouldn't work well in a production environment.
But for those of us who cannot afford a postscript printer...

-john-

-- 
===============================================================================
John A. Weeks III               (612) 942-6969               john@newave.mn.org
NeWave Communications                 ...uunet!rosevax!tcnet!wd0gol!newave!john
===============================================================================