Superpaint (Draw objects don't print!)

Article View: comp.sys.mac.apps

Article #8163

#8163

From: Mark Sicignano
Date: Wed, 03 Apr 1991 16:30

18 lines
1123 bytes

I drew some objects in a Superpaint document.  They are drawn in the
"draw" layer, and they are beziers.  They show up on the screen fine,
and when I go to print them, about 10 of them don't show up!  Everything
drawn is in the draw layer, and most of the objects show up, including
a number of other beziers.  I cut the objects to the paint layer, and it
prints fine, but of course, I loose the 300 dpi resolution.

Any ideas?

I'm using Superpaint 2.0, on an LC and a Mac II, printing on a LaserWriter
or a LaserWriter NT.

Anybody care to take a stab at what my problem might be?

-mark
-- 
Mark Sicignano                                  ...!uunet!hsi!mark
3M Health Information Systems                   mark@hsi.com

Technical Details

Message-ID: <3349@hsi86.hsi.com>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!crdgw1!uunet!hsi!hsi86!mark

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!crdgw1!uunet!hsi!hsi86!mark
From: mark@hsi86.hsi.com (Mark Sicignano)
Newsgroups: comp.sys.mac.apps
Subject: Superpaint (Draw objects don't print!)
Message-ID: <3349@hsi86.hsi.com>
Date: 3 Apr 91 16:30:09 GMT
Reply-To: mark@hsi.com (Mark Sicignano)
Organization: 3M Health Information Systems, Wallingford, CT.
Lines: 18