🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: comp.sys.mac.forsale
3 messages
3 total messages Started by Liberty For ALL! Sat, 22 Feb 2003 20:00
FA: LaserWriter IIg LogicCard,32MB,Ethernet+Transceiver FAST UPGRADE!
#313
Author: Liberty For ALL!
Date: Sat, 22 Feb 2003 20:00
144 lines
7741 bytes
--------------090607040807010504020803
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

LaserWriter IIg LogicCard,32MB,Ethernet+Transceiver FAST UPGRADE!

For Auction on eBay user ID  liberty-for-all!

http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=liberty-for-all%21&include=0&since=-1&sort=3&rows=25


Please bookmark the above page as well, as I will be adding a number of 
other NeXT/Apple items in the next few hours/days.  This printer logic 
card can even print from NEXTSTEP with the proper drivers!  

Happy bidding...

TIA  ;-)

Apple LaserWriter IIg Logic Card, 32MB RAM, EtherNet (WorkGroup Printer 
Class) + EtherNet Transceiver! FAST UPGRADE!!!
The printing fun is sure to never end with this High Quality Ethernet 
PostScript Level 2 Logic Card upgrade!!! ;-)

NO RESERVE PRICE!!!

Thank you for examining this super item! Successful high bidder gets 
this multipurpose Apple LaserWriter IIg WorkGroup Ethernet Printer Logic 
Card upgrade, WITH Ehernet Transceiver AAUI -- ready to go to work on 
your Windows/Linux PC or Mac computer with 
EtherNet/LocalTalk/EtherTalk/RS-232! Card has the following ports (logic 
card is Model M8009): RS-232C, Serial, AAUI EtherNet, SCSI (for a cache 
hard drive). This card is fully tested printing graphics/text and worked 
perfectly last time it was used with a PowerMac G4, and should work with 
any PC as well with AppleTalk/LocalTalk/EtherTalk! This item will be 
shipped WELL PACKED, test page has been printed. This board has VERY LOW 
mileage on it, with only 15,373 copies. Right out of the box plug-into 
your existing printer and print documents and pictures, even run a small 
business over ethernet cabling MUCH FASTER!

Can work with Windows 95, NT 3.5.1 & 4.0, 2000, Mac OS 7,8,9,10 with 
proper drivers! Use the Apple Printer Utility 2.2 on Mac OS, or the 
Printer Properties in Windows to configure the printer. Support and 
Manuals are available here: <http://www.info.apple.com/usen/legacy/>


*   
Mac OS X drivers are built-in to Mac OS X 10.1 & 10.2

*   
Mac OS 7,8,9 drivers are built-in to the Mac OS, and downloadable here: 
<http://docs.info.apple.com/article.html?artnum=30154>

*   
Windows drivers are supported by Microsoft and are built into the 
operating system, the Apple LaserWriter Utility for Windows may also be 
useful.


With the logic board inside, you can upgrade a LaserWriter IIsc, IInt, 
IIntx, or IIf printer! Apple says the LaserWriter IIg logic card DOUBLES 
the processing speed of your IIntx and can QUADRUPLE the performance 
power of an IInt or IIsc! This upgrades a IIf adding Ethernet (vs slow 
serial). Upgrade by removing the 2 screws, sliding out your existing 
logic card, and replace it with this FAST IIg logic card! This is the 
speediest LaserWriter II upgrade available!

The IIg includes standard, the resolution enhancement features FinePrint 
and PhotoGrade which really enhance the 300 DPI to rival 600 DPI. The 
printer includes an Ethernet AAUI interface, which can be simultaneously 
connected to Ethernet, LocalTalk, and RS232/422 Serial (up to 57600 bps!).

The IIg uses a 25Mhz 68030 processor, 5MB memory is standard, this 
printer logic card has been upgraded to 32MB! This logic card can be 
used by both Apple Macintosh and PC computers. A SCSI interface allows 
you to store additional Adobe PostScript and TrueType fonts via an 
external hard drive! The IIg supports both Adobe PostScript Level 2 and 
HP LaserJet IIP (PCL 4+) emulation!

This is the simple, low-cost way to really increase the speed and 
functionality of your existing IIsc/IInt/IIntx/IIf printer!

Specifications from the full LaserWriter IIg (auction is for Logic Card 
& Transceiver ONLY):


*   
Apple LaserWriter IIg Workgroup Printer

*    25 MHz Motorola 68030
*    Marking Engine- Canon LBP-SX laser
*    8 Pages Per Minute (PPM) max
*    300 Dots Per Inch (DPI) enhanced with FinePrint, PhotoGrade for 
high-quality scanned images
*    Fonts- ITC Avant Garde Gothic, ITC Bookman, Courier, Helvetica, 
Helvetica Narrow, New Century Schoolbook, Palatino, Symbol, Times, ITC 
Zapf Chancery, and ITC Zapf Dingbats - Supports any TrueType or 
PostScript fonts -- ALL FONT SLOTS ARE FILLED!
*    32 MB 80ns RAM (max IS INSTALLED!)
*    2 MB ROM
*    PostScript Level 2 & PCL 4+ mode (HP LaserJet IIP emulation)
*    Interfaces
- RS-422/423 (8-pin circular miniDIN) aka LocalTalk
- RS-232C (25-pin D shell connector)
- Ethernet (15-pin [uses Apple's AAUI interface)
ThinNet, 10Base-T, and ThickNet cabling
- Simultaneous connection to Ethernet, LocalTalk, RS-232, and RS-422
- SCSI for external hard disk font storage
*    Recommended Duty Cycle - Toner cartridge - 4,000 pages at 5% density
- Printer - minimum 300,000 pages (equivalent to printing 200 pages a
day, 5 days a week, 52 weeks a year, for more than 5 years)
*    Print Materials- Media
- Apple recommends 16- to 20-lb. bond from cassette [60 to 80 g/m(to
the 2nd power)] ; up to 36-lb. [135 g/m(to the 2nd power)] in manual
mode.
- Unit handles labels, envelopes, and transparencies
- Sizes
Paper: U.S. letter, U.S. legal, A4, B5
Envelopes: minimum 3.5 x 7 inches (86 x 178mm);
maximum 7.4 x 10.5 inches (188 x 267mm)
*    Capacities- Paper cassette: 200 sheets of 20-lb. [75 g/m (to the 
2nd power)] paper
Optional envelope cassette: 15 envelopes
Manual feed with single sheet feeder
*    Printable Surface- Maximum printable line: 8.1 inches (205.9 mm)
- Minimum margins: .197 inches (5.1 mm)
*    Size and Weight- Height: 8.6 inches (21.8 cm)
- Depth: 18.5 inches (47.5 cm)
- Weight: 45.0 lb. (20.3 kg)
- Width: 20.0 inches (50.8 cm)
- Width with letter-size cassette: 26.4 inches (67.1 cm)
*    Power Requirements- U.S./Japan: 90 to 126 volts AC, 50 to 60 hertz
- Europe/Australia: 198 to 264 volts AC, 50 hertz
*    Power Consumption- Standby: 170 watts average
- Operating: 900 watts maximum at 115 volts
780 watts maximum at 220 volts
880 watts maximum at 240 volts
*    Operating Environment- Temperature: 50 to 90 degrees F (10 to 32 C)
- Humidity: 20% to 80%



--------------090607040807010504020803--
Re: FA: LaserWriter IIg LogicCard,32MB,Ethernet+Transceiver FAST UPGRADE!
#311
Author: Heiko Recktenwald
Date: Sun, 23 Feb 2003 13:56
16 lines
1861 bytes
Liberty For ALL! <libertyforall@mindspring.com> wrote:
> LaserWriter IIg LogicCard,32MB,Ethernet+Transceiver FAST UPGRADE!

A pity, that you have to cannibalize it.

I have 8 MB, what are the additional 24 MB good for? fonts? speed?

> Can work with Windows 95, NT 3.5.1 & 4.0, 2000, Mac OS 7,8,9,10 with 

But not over ethernet/ethertalk with Windows, I fear, or could I?

I dont have more than dina4 papers and for printing photograde 8 MB
are enough.

H.
 
Re: FA: LaserWriter IIg LogicCard,32MB,Ethernet+Transceiver FAST UPGRADE!
#312
Author: blah
Date: Sun, 23 Feb 2003 17:40
21 lines
1790 bytes
You wouldn't want it, it's very slow, 300bpi and doesn't do PCL.

On Sun, 23 Feb 2003 14:56:54 +0100, uzs106@uni-bonn.spam.spam.spam.de
(Heiko Recktenwald) wrote:

>Liberty For ALL! <libertyforall@mindspring.com> wrote:
>> LaserWriter IIg LogicCard,32MB,Ethernet+Transceiver FAST UPGRADE!
>
>A pity, that you have to cannibalize it.
>
>I have 8 MB, what are the additional 24 MB good for? fonts? speed?
>
>> Can work with Windows 95, NT 3.5.1 & 4.0, 2000, Mac OS 7,8,9,10 with 
>
>But not over ethernet/ethertalk with Windows, I fear, or could I?
>
>I dont have more than dina4 papers and for printing photograde 8 MB
>are enough.
>
>H.
> 
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads