🚀 go-pugleaf

In article <2aab79d7.0306240551.75d8fa57@posting.google.com>, Chris
Szilagyi <chris@groupinfo.com> wrote:

> Hello,
> 
> We have a very weird problem burning DVDs with Toast 5.1.2 on a beige
> G3 with Mac OS 9.2.2, 64 MB RAM.  The burner is a Lacie DVD Burner, (a
> Pioneer A04 I believe), connected via firewire.  The firewire port is
> provided by a Keyspan firewire PCI card.  The partitions that we burn
> from were created with silver lining.  The problems we have are that
> the disc will burn fine, then the verification process will fail. 
> This happens in 1 out of every 3-4 discs burned.  And, every time that
> the verification fails, Toast says it is around sector
> 2,xxx,xxx-2,1xx,xxx.  We have done just about everything to this
> machine, including re-installing the OS, using minimum extensions set,
> re-installing Toast.  We use Norton disk doctor each time on the files
> before we burn the DVD. And, we have an older CD burner also connected
> via the same firewire card that works fine.  We have also tried the
> burner on a different machine and no problems.
> 
> This system worked for 6 months without a problem, then all of a
> sudden started giving us these problems within the past 4 months or
> so.  Has anybody seen similar problems in Toast???  We'd appreciate
> any feedback.
> 
> Thanks,
> --
> Chris

Chris
I had a similar problem with OS 9.0.4 and OS 9.2.2 with Toast 4.1.2 and
Jam 2.6 when burning CDs. I got round the problem by disabling the
firewire and USB authoring support extensions. It might be that there
is a similar issue with the later version of Toast and DVD. Have you
tried contacting Roxio for help? thier turnround for support is quite
good.

Paul