Re: Need jumper setting on HP 4mm for Mac

Article View: comp.sys.mac.hardware.storage

Article #47

Back to comp.sys.mac.hardware.storage Previous Next

#47

From: Al Slater
Date: Fri, 10 Nov 1995 11:55

11 lines
1008 bytes

Laura Mitchell (mitchell@coyote.csusm.edu) wrote:
: I need to get jumper settings for an HP 4mm tape drive, model# HPC1533
: so that it will work with a Macintosh.  Unfortunately, the manual has
: information for DEC, SUN, SGI, etc, but nothing for Macs.

Switch settings should be:
11011111
Switch 3 On to disable MRS.

cheers,
al

Technical Details

Message-ID: <DHtt4t.C7J@bri.hp.com>

Path: arc1-ca.pugleaf.net!jocko.bri.hp.com!aslater

References: <47tivr$21o0@bobcat.csusm.edu>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.mac.hardware.storage,comp.sys.mac.hardware.misc,comp.periphs,comp.periphs.scsi,comp.arch.storage
Path: arc1-ca.pugleaf.net!jocko.bri.hp.com!aslater
From: aslater@jocko.bri.hp.com (Al Slater)
Subject: Re: Need jumper setting on HP 4mm for Mac
Sender: news@bri.hp.com (News User)
Message-ID: <DHtt4t.C7J@bri.hp.com>
Date: Fri, 10 Nov 1995 11:55:41 GMT
Reply-To: aslater@jocko.bri.hp.com
References: <47tivr$21o0@bobcat.csusm.edu>
Nntp-Posting-Host: jocko.bri.hp.com
Organization: Hewlett-Packard
X-Newsreader: TIN [version 1.2 PL2]
Followup-To: comp.sys.mac.hardware.storage,comp.sys.mac.hardware.misc,comp.periphs,comp.periphs.scsi,comp.arch.storage

Reply to Parent Message