Q: How to connectors/jumpers for SCSI ID

Article View: comp.sys.mac.hardware.storage

Article #86

Back to comp.sys.mac.hardware.storage Previous Next

#86

From: Keehwan Hong
Date: Thu, 04 Jan 1996 15:17

39 lines
1367 bytes

  I have a SCSI harddisk (IBM deskstar) and an external box.
  I want to connect connectors (from thumb-wheel switch for SCSI ID
  in the external box) to jumpers (in the hard drive), and
  want to connect for LED.

  
* Connectors from the box represents as follows:

  Color  Black  Yellow  Blue  Red
  ID SW   COM     4      2     1

  Color  Red    Black
  LED     +       -


* Pins in the hard disk represents as follows:

  SCSI ID    Position
             1   2   3
     6       :  []  []
     5      []   :  []
     4       :   :  []
     3      []  []   :
     2       :  []   :
     1      []   :   :
     0       :   :   :

  LED        Position
             7
             :

* Question:
  0.  What kind of parts are needed to connect these?
  1.  Where can I buy the parts?
  2.  Would you explain how to connect?

  Thanks in advance.

  from Keehwan Hong (khong@magnus.acs.ohio-state.edu)

Technical Details

Message-ID: <4cgr1k$osv@charm.magnus.acs.ohio-state.edu>

Path: arc1-ca.pugleaf.net!magnus.acs.ohio-state.edu!khong

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!magnus.acs.ohio-state.edu!khong
From: khong@magnus.acs.ohio-state.edu (Keehwan Hong)
Newsgroups: comp.sys.mac.hardware.storage,comp.periphs.scsi,comp.sys.ibm.pc.hardware.storage
Subject: Q: How to connectors/jumpers for SCSI ID
Date: 4 Jan 1996 15:17:08 GMT
Organization: The Ohio State University
Message-ID: <4cgr1k$osv@charm.magnus.acs.ohio-state.edu>
NNTP-Posting-Host: beauty.magnus.acs.ohio-state.edu