Thread View: comp.sys.mac.hardware.storage
1 messages
1 total messages
Started by Mark J Mathis
Sat, 06 Jan 1996 00:52
Re: Q: How to connectors/jumpers for SCSI ID
Author: Mark J Mathis
Date: Sat, 06 Jan 1996 00:52
Date: Sat, 06 Jan 1996 00:52
28 lines
1651 bytes
1651 bytes
In message <4cgr1k$osv@charm.magnus.acs.ohio-state.edu> - khong@magnus.acs.ohio-state.edu (Keehwan Hong) writes: :> :> I have a SCSI harddisk (IBM deskstar) and an external box. :> I want to connect connectors (from thumb-wheel switch for SCSI ID :> in the external box) to jumpers (in the hard drive), and :> want to connect for LED. [diagrams deleted] :>* Question: :> 0. What kind of parts are needed to connect these? :> 1. Where can I buy the parts? :> 2. Would you explain how to connect? We have something similar for a cd-rom tower, and I assume the hard drive would be the same. If you purchase a tower-style enclosure, it will most likely come set up with all the parts you need. If not, ask the dealer you purchase it from, it can be set up easily. The meat of it is that you have a thumbwheel on the enclosure, connected with (8 in our case) leads that cover all of the id jumpers. The thumbwhell will then set the jumper, by shorting the correct pair of jumpers as per the id# dialed in. The led is just a matter of connecting the leads from the hd to the led on the enclosure. Mark J Mathis mjmathis@fcol.com Team OS/2 *** Warpin' the Highway with OS/2 Warp ***
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads