Article View: comp.sys.mac.oop.macapp3
Article #95Re: "Bare" views in Ad Lib
From: 3M, Ran Bedekar,PRT
Date: Thu, 19 Nov 1992 13:54
Date: Thu, 19 Nov 1992 13:54
14 lines
1090 bytes
1090 bytes
Rich, The 'View' format in MacApp 3.0 requires that a single view be at the top of a hierarchy saved as a resource. This was not the case in MA2. If you try to put multiple views at the top level (without using a window as your top view) Ad Lib will enclose them with a generic TView with the id 'base'. (This is mentioned in the manual but not described at length.) If you edit this view by adding more views at the top level (i.e., even with 'base') you will get another 'base' to enclose them all. The only way to avoid this is to make sure that all view resources contain only one view at the top of the hierarchy. Regards, Nick
Technical Details
Message-ID:
<722186090.7024023@AppleLink.Apple.COM>Path:
arc1-ca.pugleaf.net!sparky!uunet!ornl!rsg1.er.usgs.gov!darwin.sura.net!wupost!cs.utexas.edu!sun-barr!ames!data.nas.nasa.gov!taligent!apple!applelink.apple.comShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!ornl!rsg1.er.usgs.gov!darwin.sura.net!wupost!cs.utexas.edu!sun-barr!ames!data.nas.nasa.gov!taligent!apple!applelink.apple.com From: DIGIMATCH@AppleLink.Apple.COM (3M, Ran Bedekar,PRT) Newsgroups: comp.sys.mac.oop.macapp3 Subject: Re: "Bare" views in Ad Lib Message-ID: <722186090.7024023@AppleLink.Apple.COM> Date: 19 Nov 92 13:54:00 GMT Sender: daemon@Apple.COM Organization: AppleLink Gateway Lines: 14