Powerbook 3400c and Quicktake 200 camera problem

Article View: comp.sys.mac.portables

Article #103

Back to comp.sys.mac.portables Previous Next

#103

From: Will Howard
Date: Tue, 06 Oct 1998 00:00

11 lines
1506 bytes

System: PB3400c 64mb RAM, 2GB HD, System 8.1
Quicktake 200 camera and Quicktake 200 software 1.0

Problem: after installing the Quicktake software (with all extensions off)
and restarting, I can't get the computer to recognize the camera. I keep
gettinog  a message that something else may be using the modem/printer
port. The only device that uses that port on that system is a HP
Deskwriter printer, and I've unplugged that and disabled those drivers
using Extensions Manager.  I have a modem, but it's the PC Card variety,
not the built-in Ethernet/Modem card that comes with U.S. models of the
PB3400. Any ideas what I'm missing or need to have present? Thanks.

Technical Details

Message-ID: <Will.Howard-0610981651140001@alberta.antcrc.utas.edu.au>

Path: arc1-ca.pugleaf.net!unknown!not-for-mail

Show Full Headers

Complete Article Headers

X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 107dd4,8b13f07647f58c19,start
X-Google-Attributes: gid107dd4,public
X-Google-Thread: 11002a,8b13f07647f58c19,start
X-Google-Attributes: gid11002a,public
X-Google-Thread: 1156c9,8b13f07647f58c19,start
X-Google-Attributes: gid1156c9,public
X-Google-Thread: 10b5e3,8b13f07647f58c19,start
X-Google-Attributes: gid10b5e3,public
From: Will.Howard@utas.edu.au (Will Howard)
Subject: Powerbook 3400c and Quicktake 200 camera problem
Date: 1998/10/06
Message-ID: <Will.Howard-0610981651140001@alberta.antcrc.utas.edu.au>
X-Deja-AN: 398170168
X-NNTP-Posting-Host: alberta.antcrc.utas.edu.au
Organization: Antarctic CRC
NNTP-Posting-Date: Tue, 06 Oct 1998 15:51:25 EST
Newsgroups: comp.sys.mac.portables,comp.sys.mac.hardware,comp.sys.mac.system,aus.computers.mac