🚀 go-pugleaf

In article <obg.826548144@nada.kth.se>, obg@nada.kth.se (Olof Backing) wrote:

|In <stevendc-1003961713090001@slip1163.rmii.com> stevendc@rmii.com (S.
Curtis) writes:
|
|>I have a powerwave 604/132, and I want to use my powerbook 180 as an SCSI
|>device. In the cable between the two computers, do I need one terminator,
|>2 terminators, or no terminators at all?  If you have an answer, could you
|>send email?  Thanks a bunch!
|
|This setup will not work, since both computers have SCSI ID=7 and will
|interfere with each other.

it should work, if you've got the dark gray cable (the same color as the pb)

normally, you wouldn't need a terminator between the devices. the 604's got
termination and the pb's got it too. -- the pb's got 'weak' termination and 
you might not get a 'good' connection if you add another resistor pak, or
terminator.

if i'm wrong, or if you doubt, check yr pb manuals. it should be in there.


|
|/Olof
|--
|WHOAMI: Olof Backing                                 EMAIL:
|WHERE:  Royal Institute Of Technology, Stockholm     obg@nada.kth.se
|SNAIL:  Skarpnacks Alle 45, 3tr, S-128 33 SKARPNACK, Sweden
|VOICE:  + 46 8 931619

-- 
<b>rick ochoa</b>: welcome to the future, spaceboy!
<br><a href="mailto:ochoarn@post.drexel.edu">email.</a>
<br><a href="http://144.118.251.250/rick">visit.</a>