🚀 go-pugleaf

goble@kin.on.net (David. E. Goble) wrote:

>Hi all;
>
>Iam triying to connect my PowerBoook 1400cs to a 486Dx2/66 via modems
>direct.
>
>On the PowerBook1400, Iam running system 7.5.5 and claris OfficeWorks
>and on the 486Dx2/66, Iam running windows 3.x and Terminal.
>
>The comms settings are for both;
>
>Method: Serial Tool (Mac Setting only)
>
>Baud Rate: 9600
>Parity: None
>Data Bits: 8
>Stop Bits: 1
>Handshake/flow contriol: Xon/Xoff
                          ^^^^^^^^
I think you'll find this is the problem. *IF* the mac must use Xon/Xoff,
you'll need the tell it's modem to use it - probably ATQ3 added to the init
string.

[snip]
  __   __   _______________________________
 //)) //)) | Richard RUDEK. MicroDek.      | Insert sh, ah,
//\\ //\\  | Chatswood, Sydney. Australia. |  witty comment here. :)
           `-------------------------------'