JasmineDrive100

Article View: comp.sys.mac

Article #10166

#10166

From: Peter Chen
Date: Mon, 22 Jan 1990 02:46

16 lines
1113 bytes

Hi,
	Recently I moved a Jasmine Direct Drive 100 because the
room was getting repainted.  It was originally connected to a Mac SE with
an external 20 meg drive.  When I finally put the system back together, 
namely, the Mac SE, Direct Drive 100, abd the 20 meg drive, the 20 meg
drive mounted correctly after startup, but Direct Drive 100 didn't.
I ran the Jasmine DriveWare.  Direct Drive 100 showed up after the SCSI
bus scan, but none of the 4 partitions was recognized.  I do have a backup,
but it is somewhat outdated.
	My question is: is there any way of recovering the data? or is
there any way to make the partitions recognizable?

Peter Chen

P.S.	I had Guardian running on both drives.

Technical Details

Message-ID: <Jan.21.21.46.15.1990.7503@steely.rutgers.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!aramis.rutgers.edu!topaz.rutgers.edu!steely.rutgers.edu!petechen

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!aramis.rutgers.edu!topaz.rutgers.edu!steely.rutgers.edu!petechen
From: petechen@steely.rutgers.edu (Peter Chen)
Newsgroups: comp.sys.mac
Subject: JasmineDrive100
Message-ID: <Jan.21.21.46.15.1990.7503@steely.rutgers.edu>
Date: 22 Jan 90 02:46:18 GMT
Organization: Rutgers Univ., New Brunswick, N.J.
Lines: 16