Article View: comp.sys.mac
Article #10691Re: More questions...
From: Dave Seaman
Date: Mon, 19 Mar 1990 22:26
Date: Mon, 19 Mar 1990 22:26
23 lines
1326 bytes
1326 bytes
In article <35031@ucbvax.BERKELEY.EDU> aloh@bigbang.Berkeley.EDU (Andy Loh) writes: > 1) What would cause Multifinder to think it only has 1 Meg of > memory on a 5 Meg machine (Mac II). Should I reset > the PRAM or something. Are there inits out there that > may cause problems with Multifinder? Did you just recently upgrade the memory to 5 Meg? If so, did you follow the correct procedure? (a) Remove the four 256K SIMMs. (b) Insert the four new 1 Meg SIMMs in the same slots that were previously occupied by the 256K SIMMs. (c) Insert the four 256K SIMMs in the four slots that were previously empty. It must be done exactly this way, or your memory will not all be recognized by the Mac II. -- Dave Seaman ags@seaman.cc.purdue.edu
Technical Details
Message-ID:
<8619@mentor.cc.purdue.edu>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!wuarchive!usc!samsung!sol.ctr.columbia.edu!cica!iuvax!noose.ecn.purdue.edu!mentor.cc.purdue.edu!seaman.cc.purdue.edu!agsReferences:
<1990Mar18.224355.9745@eng.umd.edu> <35031@ucbvax.BERKELEY.EDU>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!wuarchive!usc!samsung!sol.ctr.columbia.edu!cica!iuvax!noose.ecn.purdue.edu!mentor.cc.purdue.edu!seaman.cc.purdue.edu!ags From: ags@seaman.cc.purdue.edu (Dave Seaman) Newsgroups: comp.sys.mac Subject: Re: More questions... Message-ID: <8619@mentor.cc.purdue.edu> Date: 19 Mar 90 22:26:20 GMT References: <1990Mar18.224355.9745@eng.umd.edu> <35031@ucbvax.BERKELEY.EDU> Sender: news@mentor.cc.purdue.edu Reply-To: ags@seaman.cc.purdue.edu (Dave Seaman) Organization: Purdue University Lines: 23