Macintalk and SuperCard

Article View: comp.sys.mac

Article #11190

#11190

From: Jeff Hallett x4-5163
Date: Tue, 27 Mar 1990 17:06

28 lines
1530 bytes

Hi folks!

Well, many thanks   to the people  who  responded a  while ago   about
getting Hypercard to speak using Supercard.

I  took the XCMD/XFCNs from the  Hypercard stax and imported   them to
Supercard and got   some really lovely crashes.   So,   I rebooted and
blocked all my INITs and it continued to  crash.  Of course, Macintalk
was installed.

The   next  step was  to  try   the  original virgin   Hypercard stax.
Executing them cause "Hypercard to unexpectedly quit (1)".  This leads
me to believe that perhaps Macintalk is not compatible with a Mac IIcx
running 6.0.4.  Again,   these experiments  were   accomplished on   a
"clean"  system  (no inits at all, except  for  32-bit Quickdraw which
really isn't an init), version 6.0.4 on a IIcx.

Any clues?

Thanks in advance, if you could mail to me, I will summarize.


--
	     Jeffrey A. Hallett, PET Software Engineering
      GE Medical Systems, W641, PO Box 414, Milwaukee, WI  53201
	    (414) 548-5163 : EMAIL -  hallettJ@gemed.ge.com
		 "Don't applaude; just throw money."

Technical Details

Message-ID: <2372@mrsvr.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!uwm.edu!mrsvr.UUCP!hallettJ@gemed.ge.com

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!uwm.edu!mrsvr.UUCP!hallettJ@gemed.ge.com
From: hallettJ@gemed (Jeff Hallett x4-5163)
Newsgroups: comp.sys.mac,comp.sys.mac.hypercard
Subject: Macintalk and SuperCard
Message-ID: <2372@mrsvr.UUCP>
Date: 27 Mar 90 17:06:07 GMT
Sender: news@mrsvr.UUCP
Reply-To: hallettJ@gemed.ge.com (Jeffrey A. Hallett (414) 548-5163)
Followup-To: comp.sys.mac
Organization: GE Medical Systems, Milwaukee,  WI
Lines: 28