🚀 go-pugleaf

cxb@lanl.gov (Clay P Booker) writes:
>Has anyone had any success in activating the "Disk File" button in 
>LaserWriter 6.0.1?  The Dialog item is now number 25 rather than 22 as....

I just did the change on 6.0.1 successfully with item number 22, same
as with 6.0.  I assume that you are aware that the resultant file
will end up in a folder called Spool Folder in the System Folder
(if you print with background printing on).  If background printing
is off, the file can end up most anywhere on the disk, depending on
where the file pointer is directing output to, i.e. where the last
application you envoked was residing.

>....because I often use MacPS on our local Sun.   For those who do not know,
>with MacPS on the Sun, you can transfer a stripped PostScript file from
>the Mac to the Sun and have it print properly on a PS printer attached...

I tried to take a MacPS file (that says %!PS-Adobe-2.0 at the top) and
print it from the sun and I get nothing.  Printing a sun file
(with %!PS-Adobe at the top) will print on the Mac just fine.  What
am I doing wrong?
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
=    John DeRosa, Motorola, Inc, Cellular Infrastructure Division           =
=                   e-mail: ...uunet!motcid!derosaj                         =
=                Applelink: N1111                                           =
= I do not hold by employer responsible for any information in this message =
=      nor am I responsible for anything my employer may do or say.         =
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=