Re: Chirping DataFrame

Article View: comp.sys.mac

Article #13790

#13790

From: Matt Dillon
Date: Thu, 13 Nov 1986 21:12

8 lines
882 bytes

	WHAT! anti-static brush unecessary???? I suggest that you do *not*
remove it.  Usually, those brushes are soldered in place. What you should do
is unsolder it to take the brush out, clean the contacts, and maybe put a
wee-dab of some semi-solid lubricant (I don't remember the type) on it.
Then resolder it back on.

						-Matt

Technical Details

Message-ID: <8611132112.AA14575@cory.Berkeley.EDU>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!esosun!net1!sdcsvax!ucbvax!CORY.BERKELEY.EDU!dillon

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!esosun!net1!sdcsvax!ucbvax!CORY.BERKELEY.EDU!dillon
From: dillon@CORY.BERKELEY.EDU (Matt Dillon)
Newsgroups: comp.sys.mac
Subject: Re: Chirping DataFrame
Message-ID: <8611132112.AA14575@cory.Berkeley.EDU>
Date: Thu, 13-Nov-86 16:12:57 EST
Article-I.D.: cory.8611132112.AA14575
Posted: Thu Nov 13 16:12:57 1986
Date-Received: Fri, 14-Nov-86 07:52:48 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: University of California at Berkeley
Lines: 8