Article View: comp.sys.mac
Article #13793Re: Static brushes
From: Brad Parker
Date: Fri, 14 Nov 1986 14:44
Date: Fri, 14 Nov 1986 14:44
23 lines
1497 bytes
1497 bytes
> ... If the things REALLY weren't
> needed, the disk builders would have LONG SINCE
> stopped putting them on there.
Wouldn't it be nice if the world were so simple... Unfortunetly, it
seems (after many discussions with 3 1/2" disk drive vendors) that many
are not sure of the effect of removing the ground springs. These springs
are carried over from 14" winchester designs through 8" and 5 1/4"
winchesters. What's not clear is whether the spindle and platter assemblies
generate enough of a charge to warrant grounding. (it would be a bummer to
have the platter discharge through the head.)
Anyway, my point is that many of the manufacturers seem confused about
the function of the ground spring on 3 1/2" drives. Most simply place
a small teflon pad on the spring to dampen the oscillation.
--
J Bradford Parker
General Computer (HyperDrive Beach, 3rd Cabana)
harvard!gcc-milo!brad
Good Sex is easier than a good slow roll. ("Left Stick! Right Rudder!...")
Technical Details
Message-ID:
<764@gcc-milo.ARPA>Path:
arc1-ca.pugleaf.net!utzoo!watmath!clyde!rutgers!mit-eddie!husc6!harvard!gcc-milo!bradReferences:
<42080@beno.seismo.CSS.GOV>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!rutgers!mit-eddie!husc6!harvard!gcc-milo!brad From: brad@gcc-milo.ARPA (Brad Parker) Newsgroups: comp.sys.mac Subject: Re: Static brushes Message-ID: <764@gcc-milo.ARPA> Date: Fri, 14-Nov-86 09:44:37 EST Article-I.D.: gcc-milo.764 Posted: Fri Nov 14 09:44:37 1986 Date-Received: Sat, 15-Nov-86 03:26:36 EST References: <42080@beno.seismo.CSS.GOV> Organization: General Computer Company, Cambridge Ma Lines: 23