Article View: comp.sys.mac
Article #14013Re: Thin lines from the LaserWriter
From: David HM Spector
Date: Wed, 31 Dec 1986 20:58
Date: Wed, 31 Dec 1986 20:58
10 lines
1004 bytes
1004 bytes
An elegant solution to this may be to use quickdraw picture comments. With piccomments, you can put postscript directly into the LaserWriter. This will buy you complete control over the printer. If you examin the prinfo record that the print manager fills out for you when using a laserwriter, the print manager likes to believe that the laserwriter is a 72dpi device, using raw/real Post- Script will allow you to get around this. I believe that tn91 deals with picture comments. David Spector NYU/acf Systems Group
Technical Details
Message-ID:
<12500001@acf4.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!seismo!cmcl2!acf4!spectorReferences:
<945@husc6.UUCP>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!cmcl2!acf4!spector From: spector@acf4.UUCP (David HM Spector) Newsgroups: comp.sys.mac Subject: Re: Thin lines from the LaserWriter Message-ID: <12500001@acf4.UUCP> Date: Wed, 31-Dec-86 15:58:00 EST Article-I.D.: acf4.12500001 Posted: Wed Dec 31 15:58:00 1986 Date-Received: Wed, 31-Dec-86 21:01:51 EST References: <945@husc6.UUCP> Organization: New York University Lines: 10