Re : Power-up failure on dataFrame 20

Article View: comp.sys.mac

Article #14746

#14746

From: hugues
Date: Mon, 23 Feb 1987 15:22

7 lines
880 bytes

I have also experienced the power-up failure but only when I had a DataFrame
connected. It seemed worse if two disks were connected ( HD20 & DF ).
It occurred even when the disk was switched off which makes me think that 
the bus does some bizzare things like draining too much current from one
of the bus signal lines or something!

Hugues

Technical Details

Message-ID: <8221@decwrl.DEC.COM>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!rutgers!mit-eddie!genrad!decvax!decwrl!shire.dec.com!hugues

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!rutgers!mit-eddie!genrad!decvax!decwrl!shire.dec.com!hugues
From: hugues@shire.dec.com.UUCP
Newsgroups: comp.sys.mac
Subject: Re :  Power-up failure on dataFrame 20
Message-ID: <8221@decwrl.DEC.COM>
Date: Mon, 23-Feb-87 10:22:47 EST
Article-I.D.: decwrl.8221
Posted: Mon Feb 23 10:22:47 1987
Date-Received: Thu, 26-Feb-87 19:38:03 EST
Sender: daemon@decwrl.DEC.COM
Organization: Digital Equipment Corporation
Lines: 7