Appletalk protocols

Article View: comp.sys.mac

Article #15325

#15325

From: milo
Date: Mon, 30 Mar 1987 00:00

18 lines
1277 bytes

Does anyone have a reasonable description on how to use the Appletalk 
Data Stream Protocol?  The DSP is mentioned in an older Appletalk book as
a protocol that provides a continuous full-duplex error-checked data stream
over Appletalk.

I am trying to put together a simple virtuial serial port that will allow
one Mac to talk over Appletalk to a computer or modem attached to another
Mac's serial port.  I'm also looking into putting together a simple "chat"
type utility for Appletalk.

Yes...I know I could write my own socket/protocol drivers but then I would
have to handle a lot of the error recovery/timeouts on my own...if DSP is
available I can avoid all that re-inventing the wheel.

Greg Corson
19141 Summers Drive
South Bend, IN 46637
(219) 277-5306 (weekdays till 6 EST)

Technical Details

Message-ID: <202@ndmath.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ihnp4!inuxc!iuvax!ndmath!milo

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ihnp4!inuxc!iuvax!ndmath!milo
From: milo@ndmath.UUCP
Newsgroups: comp.sys.mac
Subject: Appletalk protocols
Message-ID: <202@ndmath.UUCP>
Date: Sun, 29-Mar-87 19:00:08 EST
Article-I.D.: ndmath.202
Posted: Sun Mar 29 19:00:08 1987
Date-Received: Tue, 31-Mar-87 01:15:51 EST
Organization: Math. Dept., Univ. of Notre Dame
Lines: 18
Keywords: Appletalk, DSP