imagewriter question

Article View: comp.sys.mac

Article #20343

#20343

From: Dave Bailey
Date: Wed, 14 Oct 1987 21:00

7 lines
926 bytes

I have just acquired a mac+ and an old imagewriter that was attached to
a lisa. Whenever I try to print a document it prints 1 or 2 inches ok
and then goes bananas (lots of page feeds, random characters etc.) Is
there a special driver required for an old imagewriter or special
dip switch settings required? Any advice would be appreciated.

dave bailey  bailey@elrond.calcomp.com or decvax!elrond!bailey

Technical Details

Message-ID: <1345@elrond.CalComp.COM>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!genrad!decvax!savax!elrond!bailey

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!genrad!decvax!savax!elrond!bailey
From: bailey@elrond.CalComp.COM (Dave Bailey)
Newsgroups: comp.sys.mac
Subject: imagewriter question
Message-ID: <1345@elrond.CalComp.COM>
Date: Wed, 14-Oct-87 17:00:47 EDT
Article-I.D.: elrond.1345
Posted: Wed Oct 14 17:00:47 1987
Date-Received: Sat, 17-Oct-87 02:42:57 EDT
Organization: Calcomp, A Lockheed Company, Hudson, NH, USA
Lines: 7
Keywords: mac+ imagewriter