🚀 go-pugleaf

>Anybody seen/understand this?  On a Mac ][, running the new finder and
>system, I can boot into the finder just fine.  But when I set the startup to
>multifinder, it crashes into macsbug everytime.  Oddly enough, while running
>finder, I can manually start multifinder with no problem.  I'm running with
>the following:
>
>1mb, 256 color, fkey(popup) manager, macsbug (mac ][ -- 1mb).
>
>Chris Schmidt/Lincoln-Sudbury High School/390 Lincoln Rd/Sudbury/Ma/01776
>       (617) 926-3242 ----->   mit-caf!lsrhs!schmidt@eddie.mit.edu
 
First of all, the current version of MacsBug is version 5.5 which is
a universal version for Macintosh II, SE, +, 512e, and 512.  To determine
the version of MacsBug, break into Macsbug by hitting the interrupt button
and type DV (display version).  The current version is available from
APDA.  They can be reached at 206-251-6548.

The problem of crashing into Macsbug upon booting with Multifinder is strange.
I used to have that problem when I was using the ScrapSaver INIT.  When I
removed it, things were okay.  You might try to remove the FKEY manager and
reboot.
 
Certain INIT's have problems with MultiFinder and certain _combinations_ of
INIT's have problems.  So try and remove them one by one until things work.
 
Hope this helps.
 
 
/*--------------------------------------------------------------------------*/
/*  NOTE: I am _NOT_ an Apple representative.  All statements and opinions  */
/* are my own and are _not_ to be construed as any official Apple position. */
/* Byron B. Han                 UUCP: {sun,voder,nsc,mtxinu,dual}!apple!han */
/* Apple Computer, Inc.        CSNET: han@apple.csnet                       */
/* 20525 Mariani Ave MS 27Y    GENIE: BYRONHAN         CSERVE: 72167,1664   */
/* Cupertino, CA 95014        ATTNet: 408-973-6450  APPLELINK: HAN1         */
/*--------------------------------------------------------------------------*/