Article View: comp.sys.mac
Article #22363Re: some random questions
From: Tom Dowdy
Date: Tue, 01 Dec 1987 17:15
Date: Tue, 01 Dec 1987 17:15
23 lines
1690 bytes
1690 bytes
In article <6865@apple.UUCP> han@apple.UUCP (Byron Han) writes:
>Under MacTerminal 2.x, the procedure for using macput is as follows:
To clear up any confusion, it should be pointed out that the procedure
outlined below:
>1. put MacTerminal into 'MacTerminal 1.1' file transfer mode
>2. use xbin to create the .data, .rsrc, and .info files.
>3. type 'macput file'.
>4. voila.
Works with all versions from 2.0 and up, but FYI: The current release version
of MacTerminal is 2.2. Those of you who in the past had upgraded to 2.1
might wish to get 2.2, which offers support for ADB keyboards and does
stricter error checking with documents for compatability with AppleShare.
It is also fully compatible with System 4.1 and up. Additional minor
bugs were fixed.
Tom Dowdy CSNET: dowdy@apple.CSNET
Apple Computer MS:27Y AppleLink:DOWDY1
20525 Mariani Ave UUCP: {sun,voder,amdahl,decwrl}!apple!dowdy
Cupertino, CA 95014
"IN VENICE STOP STREETS FILLED WITH WATER STOP PLEASE ADVISE STOP"
Technical Details
Message-ID:
<6866@apple.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!amdahl!nsc!voder!apple!dowdyReferences:
<145@teletron.UUCP> <997@cpocd2.UUCP> <6865@apple.UUCP>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!amdahl!nsc!voder!apple!dowdy From: dowdy@apple.UUCP (Tom Dowdy) Newsgroups: comp.sys.mac Subject: Re: some random questions Message-ID: <6866@apple.UUCP> Date: Tue, 1-Dec-87 12:15:34 EST Article-I.D.: apple.6866 Posted: Tue Dec 1 12:15:34 1987 Date-Received: Fri, 4-Dec-87 23:12:52 EST References: <145@teletron.UUCP> <997@cpocd2.UUCP> <6865@apple.UUCP> Reply-To: dowdy@apple.UUCP (Tom Dowdy) Organization: Apple Computer Inc., Cupertino, USA Lines: 23 Keywords: MPW macput MultiFinder MacTerminal