Article View: comp.sys.mac
Article #23298Re: Mac II & Sony XBR
From: Christopher Ho
Date: Tue, 05 Jan 1988 03:22
Date: Tue, 05 Jan 1988 03:22
16 lines
1123 bytes
1123 bytes
In article <3571@husc6.harvard.edu> olson@endor.UUCP (Eric K. Olson) writes:
> My big question remains, "What cable do I use?"
Here is a list from my notes when I made the cable for my Sony MultiScan:
red 2
blue 9
green 12
gnd 1
csync 3
These are, of course, pins on the DB 15 connector. If I remember correctly,
the sync signal is also present on the green line, and some monitors like
to sync onto that.
BTW: I was never able to get the code working to set NTSC mode. Perhaps it
was because I have only 4 bitplanes? Has anyone had better success?
Technical Details
Message-ID:
<6014@oberon.USC.EDU>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!oberon!acrux.usc.edu!chrisReferences:
<3882@ptsfa.UUCP> <3571@husc6.harvard.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!oberon!acrux.usc.edu!chris From: chris@acrux.usc.edu (Christopher Ho) Newsgroups: comp.sys.mac Subject: Re: Mac II & Sony XBR Message-ID: <6014@oberon.USC.EDU> Date: 5 Jan 88 03:22:29 GMT References: <3882@ptsfa.UUCP> <3571@husc6.harvard.edu> Sender: nobody@oberon.USC.EDU Reply-To: chris@oberon.usc.edu (Christopher Ho) Distribution: na Organization: University of Southern California, Los Angeles, CA Lines: 16 Keywords: Sony RGB MAC II Summary: cable from Mac II video board