Article View: comp.sys.mac
Article #23822Re: Another ImageWriter II question!
From: David Robins
Date: Sun, 10 Jan 1988 23:09
Date: Sun, 10 Jan 1988 23:09
34 lines
1730 bytes
1730 bytes
In article <> tedj@hpcilzb.HP.COM (Ted Johnson) writes:
>
>
>Now that I know what Tall Adjusted it for...
>
>Does the Print Quality button on the ImageWriter II really do anything?
>I have tried it at it's 3 different settings, and the print-out looks
>the same. Do these 3 settings only make a difference when you are
>using the ImageWriter II's "native" font (i.e., when you choose
>Draft from the Draft/Good/Best dialog?
>
>-Ted
The Quality button is for the built-in font selection only. Mac
usually uses it own downloaded bit images for the WYSIWYG capability.
I am told that you can use the Imagewriter built-in fonts by setting
up the Mac to send in Draft mode, which apparently sends ASCII
straight to the printer. You can then select the desired print
quality at the printer.
BTW: The Imagewriter fonts can be also accessed by escape codes,
rather than the front panel switch. See the Technical Reference Manual.
--
-dave
====================================================================
David Robins, M.D. (ophthalmologist / electronics engineer)
Smith-Kettlewell Eye Research Foundation
(previously known as: Smith-Kettlewell Institute of Visual Sciences)
2232 Webster St; San Francisco CA 94115
415/561-1705 (voice)
{ihnp4,qantel,dual}!ptsfa!ski!dr
The opinions expressed herein do not reflect the opinion of the Institute!
Technical Details
Message-ID:
<2424@ski.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!ptsfa!ski!drShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!ptsfa!ski!dr From: dr@ski.UUCP (David Robins) Newsgroups: comp.sys.mac Subject: Re: Another ImageWriter II question! Message-ID: <2424@ski.UUCP> Date: 10 Jan 88 23:09:35 GMT Reply-To: dr@unix.UUCP (David Robins) Organization: Smith-Kettlewell Institute, S.F., CA. Lines: 34