Article View: comp.sys.mac
Article #24396Re: File xfer Timings
From: Greg Stephens
Date: Fri, 22 Jan 1988 17:52
Date: Fri, 22 Jan 1988 17:52
12 lines
1074 bytes
1074 bytes
Oops, the baud rate was 57kb. Both Mac2624 and Reflection will add linefeed on xfer to the HP 3000. Only reflection has a command language (a big difficiency in Mac2624). Reflection also has typeahead. Mac2624 has a slight edge in terms of reliability in working with HP 3000 block mode programs but Reflection is catching up quickly (especially with their 2.0 release). Reflection also wins for display speed (although you only see the difference when direct connected at 9600 or higher baud rates). While reflection is getting much better, Mac2624 is still a much more Mac-like application. Reflection is more like the HP terminals, especially in the area of configuration screens.
Technical Details
Message-ID:
<6150011@hpcupt1.HP.COM>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!amdcad!ames!pasteur!ucbvax!hplabs!hpda!hpcupt1!stephensReferences:
<6150007@hpcupt1.HP.COM>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!amdcad!ames!pasteur!ucbvax!hplabs!hpda!hpcupt1!stephens From: stephens@hpcupt1.HP.COM (Greg Stephens) Newsgroups: comp.sys.mac Subject: Re: File xfer Timings Message-ID: <6150011@hpcupt1.HP.COM> Date: 22 Jan 88 17:52:42 GMT References: <6150007@hpcupt1.HP.COM> Organization: Hewlett Packard, Cupertino Lines: 12