Re: Problems configuring CDC Wrens to Macs

Article View: comp.sys.mac

Article #2463

#2463

From: Ken Mitchum
Date: Fri, 04 Aug 1989 20:28

12 lines
1060 bytes

I have been having a similar problem with  Newbury 4380 drive (320 mb).
The drive hangs the SCSI bus on a MacPlus (but not MacII), even with
"Unit Attention" disabled. I wrote a small program to simply reset the
SCSI bus, and after that is done, I can mount the drive manually, using
the SCSI cdev. You might try the same thing - if you can get the drive
to a state that will respond to inquiry commands, you can likely find
out enough about the drive WITHOUT the manual to be able to get it up
and running.

 Ken Mitchum
 km@cadre.dsl.pitt.edu

Technical Details

Message-ID: <3208@cadre.dsl.PITTSBURGH.EDU>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!rochester!pt.cs.cmu.edu!cadre!km

References: <16553@ut-emx.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!rochester!pt.cs.cmu.edu!cadre!km
From: km@cadre.dsl.PITTSBURGH.EDU (Ken Mitchum)
Newsgroups: comp.sys.mac
Subject: Re: Problems configuring CDC Wrens to Macs
Keywords: CDC Wrens, configuration, SCSI conflicts
Message-ID: <3208@cadre.dsl.PITTSBURGH.EDU>
Date: 4 Aug 89 20:28:36 GMT
References: <16553@ut-emx.UUCP>
Reply-To: km@cadre.dsl.pitt.edu (Ken Mitchum)
Organization: Decision Systems Lab., Univ. of Pittsburgh, PA.
Lines: 12

Reply to Parent Message