Versaterm 3.1 background "send file"

Article View: comp.sys.mac

Article #24955

#24955

From: Michael Sonnier
Date: Wed, 10 Feb 1988 18:33

30 lines
1316 bytes

I have experienced some problems using "Send File" from Versaterm 3.1 under
Multi-finder.  The file transfer works ok and I can switch back to multifinder
or to another application while the transfer is in progress.  However if I
have not returned to Versaterm when the transfer ends I get the beep
notice that transfer is finished (if that option is on) and then Versaterm
dies!  When I return to Versaterm there is an error window with message that
Versaterm has unexpectedly quit (or some such garbage...).  Has this happened
to anyone else?  Any ideas why?  

My equipment:
Mac Plus

Here are the settings I use:
Text XModem
9600 Baud
Xon/Xoff active
8 bits 1 stop no parity
Direct connect to UNIX Sys V (no modem)
DEC VT100 emulation
Signal End of File Transfer On
Fast XModem w/o errors On
Communications - Modem Port

Thanks

Michael Sonnier
Bell Communications Research
Red Bank NJ
...!ihnp4!bellcore!nvuxg!mjs1

Technical Details

Message-ID: <204@nvuxg.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!bellcore!faline!thumper!ulysses!gamma!pyuxp!nvuxj!nvuxg!mjs1

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!bellcore!faline!thumper!ulysses!gamma!pyuxp!nvuxj!nvuxg!mjs1
From: mjs1@nvuxg.UUCP (Michael Sonnier)
Newsgroups: comp.sys.mac
Subject: Versaterm 3.1 background "send file"
Message-ID: <204@nvuxg.UUCP>
Date: 10 Feb 88 18:33:15 GMT
Organization: Bell Communications Research
Lines: 30
Posted: Wed Feb 10 13:33:15 1988