Article View: comp.sys.mac
Article #25186Wanted: information on MiniCad 3D
From: Martin Spanjaard
Date: Tue, 09 Feb 1988 09:29
Date: Tue, 09 Feb 1988 09:29
13 lines
853 bytes
853 bytes
I try to use MiniCad, specifically the 3D part of it, which is almost not des- cribed in the manual. It seems to be very buggy and at least very sensitive to wrong input order. When using Paste&Merge it's not clear to me if you can or must use NewObject. PolyPeek sometimes works, mostly not. DataPeek and the other data manipulation commands are totally unclear, so I don't know if they are useful anyhow. And why is DeletePoints so dangerous? Thank you in advance. Please either e-mail me, or post. Martin Spanjaard University of Amsterdam martin@uvabick.uucp
Technical Details
Message-ID:
<232@uvabick.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!uunet!mcvax!uvabick!martinShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!mcvax!uvabick!martin From: martin@uvabick.UUCP (Martin Spanjaard) Newsgroups: comp.sys.mac,comp.graphics Subject: Wanted: information on MiniCad 3D Message-ID: <232@uvabick.UUCP> Date: 9 Feb 88 09:29:03 GMT Organization: uvabick Lines: 13