Article View: comp.sys.mac
Article #27782Re: Memory configuration for Mac II ?
From: Steven James Bollinger
Date: Thu, 05 May 1988 02:30
Date: Thu, 05 May 1988 02:30
17 lines
1085 bytes
1085 bytes
> labeled (Bank B) and (Bank A) from left to right (I think). The new > board is now labled SIMM1 SIMM2 SIMM3 SIMM4 from left to right, each > label covering 2 simm slots. > > Can I use any memory configuration that I want as long as the 2 simm > slots have identical simms? (like the 2.5 MB configuration in Plus/SE) > > if anyone else has done this, or if they have a simular mother board > labeled in this way. > > Thanks for any/all ideas! Nope, you have to put the SIMMs in in Groups of 4. The Mac II is true 32-bit and so fetches from four SIMMs at once, therefore, all four must be the same. In short, SIMM1 & SIMM2 must be twins and SIMM3 & SIMM4 must be twins. Steve Bollinger (billkatt@caen.engin.umich.edu)
Technical Details
Message-ID:
<838@blue.engin.umich.edu>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!im4u!tut.cis.ohio-state.edu!mailrus!caen.engin.umich.edu!billkattShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!im4u!tut.cis.ohio-state.edu!mailrus!caen.engin.umich.edu!billkatt From: billkatt@caen.engin.umich.edu (Steven James Bollinger) Newsgroups: comp.sys.mac Subject: Re: Memory configuration for Mac II ? Message-ID: <838@blue.engin.umich.edu> Date: 5 May 88 02:30:52 GMT Organization: caen Lines: 17