Article View: comp.sys.mac
Article #28097Re: Sampling digitised sound via serial ports
From: Rick Klaus
Date: Thu, 12 May 1988 16:13
Date: Thu, 12 May 1988 16:13
12 lines
769 bytes
769 bytes
You're assuming that the serial ports are RS-232, which is
spec'ed to only 20 KBaud. However the MAC ports are RS-422, which is
designed to operate at 10 MBaud over distances less than 40 ft. You
should have no problem sampling at 22K as long as the external
digitizer will drive the line that fast.
Hope this helps
Rick Klaus
hplabs!hpvcla!rickk
Technical Details
Message-ID:
<3770018@hpvcla.HP.COM>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!bloom-beacon!mit-eddie!ll-xn!ames!ucsd!ucsdhub!hp-sdd!hplabs!hp-pcd!hplsla!hpvcla!rickkReferences:
<2108@munnari.oz>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!bloom-beacon!mit-eddie!ll-xn!ames!ucsd!ucsdhub!hp-sdd!hplabs!hp-pcd!hplsla!hpvcla!rickk From: rickk@hpvcla.HP.COM (Rick Klaus) Newsgroups: comp.sys.mac Subject: Re: Sampling digitised sound via serial ports Message-ID: <3770018@hpvcla.HP.COM> Date: 12 May 88 16:13:42 GMT References: <2108@munnari.oz> Organization: Hewlett Packard, Vancouver, WA Lines: 12