MS BASIC compatibility problems with Mac II

Article View: comp.sys.mac

Article #28498

#28498

From: Steve Jurovich
Date: Fri, 20 May 1988 20:17

16 lines
1105 bytes

I have a 5MB Mac II with a 90 MB internal drive.  I am attempting to program
data acquisition/process control programs in MS Basic and it seems that
whenever I direct ASCII output to a serial port, the Mac crashes hard, ie
unrecoverably.  I've traced it to a single line of code that sends an ASCII
string to the modem port.  I have Macsbug installed but cannot trap on the
error because the crash affects all running program; the only recovery is
rebooting.  Is there anybody out there with a patch to fix this problem?

                                        Thanks,

                                        Steve Jurovich
                                        415-423-1123

UUCP: {crash uunet}!pnet06!laser
ARPA: crash!pnet06!laser@nosc.mil
INET: laser@pnet06.cts.com

Technical Details

Message-ID: <182@hodge.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!hodge!pnet06!laser

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!hodge!pnet06!laser
From: laser@pnet06.cts.com (Steve Jurovich)
Newsgroups: comp.sys.mac
Subject: MS BASIC compatibility problems with Mac II
Message-ID: <182@hodge.UUCP>
Date: 20 May 88 20:17:38 GMT
Sender: root@hodge.UUCP
Organization: People-Net [pnet06], Orange, CA
Lines: 16