Re: Hypercard document opening across AppleShare

Article View: comp.sys.mac

Article #29244

#29244

From: Alan Tobey
Date: Thu, 16 Jun 1988 16:26

13 lines
1017 bytes

In article <2860@tekig5.TEK.COM>, danm@tekig5.TEK.COM (Daniel Milliron) writes:
> The following hypercard command:
> 
> 	open "docname" with "appname"
> 
> does not work when the document is on an AppleShare volume and everything else
> (stack, HyperCard, application) is on the startup volume (in this case, an
> internal hard disk). 

This works fine when the target document is on a TOPS volume on a VAX 4.3
server [small commercial: available from Mt Xinu as part of XINET], so
your problem is likely not a hypercard bug.  Have you carefully checked
how the pathname is specified?

Technical Details

Message-ID: <616@mtxinu.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mtxinu!alan

References: <2860@tekig5.TEK.COM>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mtxinu!alan
From: alan@mtxinu.UUCP (Alan Tobey)
Newsgroups: comp.sys.mac,comp.sys.mac.hypercard,comp.sys.mac.programmer
Subject: Re: Hypercard document opening across AppleShare
Summary: works with TOPS
Keywords: Hypercard, AppleShare, Launching
Message-ID: <616@mtxinu.UUCP>
Date: 16 Jun 88 16:26:24 GMT
References: <2860@tekig5.TEK.COM>
Organization: mt Xinu, Berkeley
Lines: 13

Reply to Parent Message